RMX 2000 Administrator's Guide - Polycom Support

2 Define the following fields:
Table 5-2 New Participant – General Properties
Field Description
Polycom RMX 2000/4000 Administrator’s Guide
Name Enter the name of the participant or the endpoint as it
will be displayed in the RMX Web Client.
The Name field can be modified using Unicode
encoding.
• English text uses ASCII encoding and can contain
the most characters (length varies according to the
field).
• European and Latin text length is approximately
half the length of the maximum.
• Asian text length is approximately one third of the
length of the maximum.•
Maximum field length in ASCII is 80 characters.
The maximum length of text fields varies according to
the mixture of character sets used (Unicode and
ASCII).
This name can also become the endpoint name that is
displayed in the video layout. For more details about
endpoint (site) names, see the RMX 2000/4000
Getting Started Guide, “"Text Indication in the Video
Layout” on page 3-35”.
Note: This field is displayed in all tabs.
Endpoint
Website (IP only)
Click the Endpoint Website hyperlink to connect to the
internal website of the participant’s endpoint. It
enables you to perform administrative, configuration
and troubleshooting activities on the endpoint.
The connection is available only if the IP address of
the endpoint’s internal site is defined in the Website IP
Address field.
5-5