RMX 2000 Administrator's Guide - Polycom Support

Chapter 16-RMX Administration and Utilities
16-80
MIB Name Description
H.320MCU-MIB
(H320-MCU.MIB)
H323MC-MIB
(H323-MC.MIB)
MP-MIB (H323-
MP.MIB)
MIB-II/RFC1213-
MIB
(RFC1213.MIB)
ENTITY-MIB
(ENTITY.MIB)
Used to identify managed objects for an H.320 MCU. It
consists of four groups: System, Conference, Terminal,
and Controls. The Conference group consists of the
active conferences. The Terminal group is used to
describe terminals in active MCU conferences. The
Controls group enables remote management of the
MCU.
Used to identify objects defined for an H.323 Multipoint
Controller. It consists of six groups: System,
Configuration, Conference, Statistics, Controls and
Notifications. The Conference group is used to identify
the active conferences in the MCU. The Notifications
group allows an MCU, if enabled, to inform a remote
management client of its operational status.
Used to identify objects defined for an H.323 Multipoint
Processor, and consists of two groups: Configuration and
Conference. The Configuration group is used to identify
audio/video mix configuration counts. The Conference
group describes the audio and video multi-processing
operation.
Holds basic network information and statistics about the
following protocols: TCP, UDP, IP, ICMP and SNMP. In
addition, it holds a table of interfaces that the Agent has.
MIB-II also contains basic identification information for
the system, such as, Product Name, Description,
Location and Contact Person.
Describes the unit physically: Number of slots, type of
board in each slot, and number of ports in each slot.