RMX 2000 Administrator's Guide - Polycom Support

Table B-1 Alarms (Continued)
Alarm Code Alarm Description
No default ISDN/PSTN Network Service
defined in ISDN/PSTN Network Services
list
No default IVR Service in IVR Services
list
Polycom RMX 2000/4000 Administrator’s Guide
No default IVR Service in IVR Services list: Ensure that
one conference IVR Service and one EQ IVR Service
are set as default.
No IP Network Services defined IP Network Service parameters missing.
No ISDN/PSTN Network Services defined No ISDN/PSTN Network Services were defined or no
default ISDN/PSTN Network was defined.
No License for ISDN/PSTN. Please
activate the RTM ISDN card through
Polycom website
No response from Central Signaling No connection with central signaling.
No response from RTM ISDN card
No usable unit for audio controller;
NTP synchronization failure The system failed to synchronize the MCU clock with the
NTP clock
Polycom default User exists. For security
reasons, it is recommended to delete this
User and create your own User.
Port configuration was modified
Power off
Process idle Process idle:
Process did not finish before deadline.
Process terminated Process terminated:
[Process name] terminated.
Product activation failure
B-11