RMX 2000 Administrator's Guide - Polycom Support

Chapter 16-RMX Administration and Utilities
16-64
When the position of a slider is changed the system calculates the
effect on the remaining system resources and adjusts the slider scales
accordingly.
For example: Decreasing the allocated CIF ports from 80 to 53, free
ports for allocation that can be used to allocate up to 135 voice ports
or 10 SD ports or 6 HD 720p ports, or any combination of the resource
types.
Allocating five Audio Only ports decreases the number of CIF ports
while allocating one SD port decreases the number of CIF ports.
4 Click OK to activate the new Resource Capacity.
If after resources are recalculated there are purple areas to the right of
the blue slider buttons indicating unallocated resources in the system,
the system issues a warning stating that there are un-allocated
resources in the system.
5 Optional. Repeat this procedure from Step 2 to further optimize the
resource allocation.
Un-allocated resources cannot be used by any participants.
If after recalculating the resources the system determines that there
are insufficient resources to support the configuration indicated by
the sliders:
— A major System Alert is raised with Insufficient resources in its
Description field.
— The Fixed Resource Capacity blue slider buttons are disabled.
— A warning message is displayed.
• Click OK to close the warning message box.
a Optional.
• Click the Reset Configuration button to set all the blue
slider buttons to zero.
• Reconfigure the resource allocation.
• Click OK to activate the new resource allocation.
b Optional. Click the Cancel button to accept the resource
allocation.
The System Alert remains active.