1948-1952 Shop Service Manual - - Hudson-Essex-Terraplane Club

TRANSMISSION 8 - 7
washer, and two bronze thrust washers through cover
opening, Figure 12.
20. Working through mainshaft bearing hole in front face
of case drive-out reverse idler gear shaft with Driver
J-1574, Figure 13. When shaft is driven all the way
out, lift reverse idler gear from case.
21. Remove shift selector shaft nut and washers, lift off
selector outer lever.
FIGURE 11
b: Remove main drive gear bearing using Puller J-1134-H with
cup type, adaptor on puller screw, Figure 11.
FIGURE 14
FIGURE 12
22. Remove shift selector shaft se t screw, Figure 14.
18. Remove shift shaft inner lever.
19. Remove countershaft gear cluster, one thick steel thrust
FIGURE 13
FIGURE 15