1948-1952 Shop Service Manual - - Hudson-Essex-Terraplane Club

FUEL SYSTEM & EXHAUST 4 - 9
6. Remove the low speed jet assembly, Figure 13.
9. Remove nozzle passage plug, nozzle retainer plug and
nozzle, Figure 16. (Be sure to remove small nozzle gasket
from casting.)
FIGURE 14
7. Remove the pump jet plug and gasket assembly and
pump jet, Figure 14.
FIGURE 17
10. Remove the pump strainer, and pump intake check
ball, Figure 17.
FIGURE 15
8. Remove the pump discharge ball retainer
and gasket, and check ball, Figure 15.
FIGURE 18
11. Separate body from flange assembly, Figure 18, and
remove body flange gasket.
FIGURE 16
FIGURE 19
COPYRIGHT 1950 BY CARTER CARBURETOR CORPORATION. ALL RIGHTS RESERVED.