1948-1952 Shop Service Manual - - Hudson-Essex-Terraplane Club

8 - 30 TRANSMISSION
7. Remove 1/4" rod from levers. It should come out easily.
8. Check manual shift crossover by moving control lever up
and down. If crossover is not smooth, shorten or
lengthen shift rod attached to low and reverse lever by moving
adjusting
nuts at trunnion, 1/4 turn at a time, until smooth action
is obtained.
9. Check gear shifting by moving control lever through the
various positions. If interference or sticking is encountered
when going into low or reverse, check for proper adjustment
of the spring retainer (B).
Source of
Information
Date
REFERENCE
Subject