Definity ECS Admin for Network Connectivity.pdf - TextFiles.com

Configuration 2: R7r (+CMS) R7csi
3 C-LAN Administration
• Apply the coverage path to stations, and if the switch is an r model, specify the
node name of the Intuity system for each station that has a voice mailbox on the
Intuity system.
Intuity system administration
The following procedures must be done on the Intuity system:
• Administer the UNIX name and IP address for the Intuity system.
• Administer the switch interface link to the host switch. This includes the
Extension Length, Host Switch Number, AUDIX Number, Switch Number,
Switch IP Address, and TCP Port.
• Administer extension numbers, channels, and services.
• Administer subscribers.
Administer the TCP/IP
Network Addressing
Do the following procedures to administer the Intuity system.
If not already done, you must set up the basic networking addressing for the Intuity
system. Do the following:
1 Beginning at the Lucent INTUITY Main menu, select:
> TCP/IP Administration
> Network Addressing
The system responds with the Network Addressing window.
+-------------------------------------------------------+
+ Network Addressing +
+-------------------------------------------------------+
| TCP/IP Interface: eeE_0 |
| Host Name: denaudix |
| IP Address: 192.168.1.125 |
Subnet Mask: 192.168.1.224 |
| Default Gateway IP Address: 192.168.1.97 |
+-------------------------------------------------------+
2 Use Worksheet A to enter the correct values in this window.
3 Press F3 (Save).
4 Continue with the next procedure, “Administer Switch Interface.”
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000 CID: 77730
93