Definity ECS Admin for Network Connectivity.pdf - TextFiles.com

Networking Screens
A Screens Reference
Destination Digits
Used to enable access to the correct trunk group at the far end of the connection. This
is typically the trunk access code (TAC) plus the extension of data module on the far
end. If you use just the extension, then you must administer UDP and AAR route
patterns to access the correct trunk group.
Valid Value
The extension or TAC
+ extension of the
destination data
module.
Usage
If a trunk access code (TAC) is used, prepend the TAC
to the extension.
If the Establish Connection field is n, this field
should be left blank.
Destination Node Name
Name of the node at the far end of this connection.
Valid Value
A name administered on
the Node Names Screen.
Usage
Chap?
Challenge Handshake Authentication Protocol.
Valid Value
y/n
Usage
Identifies whether the Challenge Handshake Authentication
Protocol is used over this link. If you enter y, the system
will prompt for a CHAP secret (password).
Chap Secret
Password for the Challenge Handshake Authentication Protocol.
Valid Value
1–30 alphanumeric
characters, but
cannot begin with
the “at” sign (@).
Default is blank.
Usage
This field displays only if the CHAP field is y. This field
displays the data being entered or changed. It displays an
asterisk (*) when the form is brought up initially if the field
already contains some data.
This field displays the actual contents rather than asterisks if
the form is brought up by the init login.
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000 CID: 77730
265