04.11.2014 Views

Definity ECS Admin for Network Connectivity.pdf - TextFiles.com

Definity ECS Admin for Network Connectivity.pdf - TextFiles.com

Definity ECS Admin for Network Connectivity.pdf - TextFiles.com

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Simple <strong>Network</strong> Management Protocol (SNMP)<br />

Glossary<br />

Simple <strong>Network</strong> Management Protocol (SNMP)<br />

An International Standards Organization (ISO) protocol that sets standards <strong>for</strong><br />

<strong>com</strong>munications between network <strong>com</strong>ponents and network management<br />

stations. SNMP handles network resources using the in<strong>for</strong>mation contained in a<br />

management in<strong>for</strong>mation base (MIB), a virtual database resident on the various<br />

parts of the network. SNMP supports security, configuration, per<strong>for</strong>mance, fault<br />

management, and accounting management. SNMP is part of the ISO Open<br />

System Interconnect (OSI) Model specification.<br />

SMDR<br />

Station Message Detail Recording. (Same as call detail recording — CDR).<br />

SNMP<br />

See Simple <strong>Network</strong> Management Protocol (SNMP).<br />

SPE<br />

Switch Processing Element<br />

subnet<br />

A network within a larger network. Subdividing a network into subnets<br />

improves the efficiency of routing and makes the best use of the limited number<br />

of addresses available with any given addressing scheme. Subnetworks are<br />

defined by using part of the host-machine portion of the IP (Internet Protocol)<br />

address as an additional layer of network in<strong>for</strong>mation. Routers can then<br />

distinguish between a networking part that is significant <strong>for</strong> internet/intranet<br />

routing and a host-machine part, which is significant only within the local<br />

subnet.<br />

subnet mask<br />

A bit pattern that lets a network administrator define subnets using the<br />

host-machine portion of the IP (Internet Protocol) address. The subnet mask has<br />

binary ones in positions corresponding to the network and subnet parts of the<br />

address and zeros in the remaining, host-address positions. During IP-address<br />

resolution, zero fields in the mask hide corresponding host-address fields in the<br />

address, causing the router to ignore them. The router resolves only the<br />

networking part of the address, leaving the host part <strong>for</strong> the local subnet to<br />

resolve. This increases speed and makes multicasting more efficient. Subnet<br />

masks are usually written in the decimal notation used <strong>for</strong> IP addresses.<br />

T T-1<br />

A 4-wire (2 twisted pair), digital <strong>com</strong>munications link with a capacity of 1.544<br />

Mbps (1,544,000 bits per second). A T-1 provides 24 separate 64-Kbps<br />

channels. These can support up to 23 concurrent voice and data channels plus a<br />

separate channel <strong>for</strong> signalling and framing (synchronization). T-1 is the<br />

standard <strong>for</strong> data <strong>com</strong>munications in North America and Japan. Also spelled<br />

T1. See E-1.<br />

486<br />

<strong>Admin</strong>istration <strong>for</strong> <strong>Network</strong> <strong>Connectivity</strong><br />

CID: 77730 555-233-504 — Issue 1 — April 2000

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!