Definity ECS Admin for Network Connectivity.pdf - TextFiles.com

DCS over IP Trunk
Changing Audio
Settings
F IP Trunk Installation and
Administration
To change the audio settings so that NetMeeting operates properly with the IP trunk
application, follow these steps.
1 From the Tools menu choose Options and then select the Audio tab. The Audio
tab settings appear as shown in Figure 5.
Figure 11.
Audio Tab Settings in Options Dialog Box
2 Click the check box for Enable full duplex audio so I can speak while receiving
audio.
If this option is dimmed, it is not accessible to change. This means your sound
card is not full duplex. You need to install updated sound card drivers to make the
card full duplex.
3 Click the check box for Use H.323 gateway and type the IP address of the IP
trunk in the corresponding field.
4 In the same Options window, select the Calling tab and clear the Refresh directory
listing check box.
5 Click OK to save your changes and close the Options dialog box.
446
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000