Definity ECS Admin for Network Connectivity.pdf - TextFiles.com

H.323 Trunk Administration
2 H.323 Trunks
Task 1 Steps
Begin
> Open Node Names screen — enter ch node-n
> Go to page 2 of the screen
change node-names Page 2 of 6
NODE NAMES
Name IP Address Name IP Address
clan-a1______ 192.168.10_.31_ ___________ ___.___.___.___
clan-a2______ 192.168.20_.31_ ___________ ___.___.___.___
default 0 .0 .0 .0 ___________ ___.___.___.___
medpro-a1___ 192.168.10_.81_ ___________ ___.___.___.___
medpro-a2___ 192.168.20_.81_ ___________ ___.___.___.___
medpro-a3___ 192.168.10_.82_ ___________ ___.___.___.___
medpro-b1___ 192.168.10_.83_ ___________ ___.___.___.___
___ ___.___.___.___ ___________ ___.___.___.___
> Enter values.
Field
Name
IP Address
Conditions/Comments
Enter unique node names for:
• Each C-LAN ethernet port on the network
• Each IP-Interface (Medpro) board on the local switch.
The default node name and IP address is used to set up a default
gateway, if desired. This entry is automatically present on the Node
Names screen and cannot be removed.
When the Node Names screen is saved, the system automatically
alphabetizes the entries by node name.
Enter a unique IP addresses for each node named in the previous
field.
> Submit the screen
End
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000 CID: 77730
39