Definity ECS Admin for Network Connectivity.pdf - TextFiles.com

Configuration 5B: R8csi R8r (2 C-LANs)
R8si
3 C-LAN Administration
Switch 3 Task — Assign Link via ethernet Data Module to the LAN
This task administers an ethernet data module on Switch 3 for the ethernet connection
to Switch 1. The data module associates a link number with a port address, extension
number, and node name for the C-LAN port used for this connection.
Steps
Begin
> Open Data Module form — enter a da n
add data next
DATA MODULE
Page 1 of X
Data Extension: 3901 Name: ethernet on link 1 BCC: 2
Type: ethernet
Port: 01a0517_
Link: 1
Network uses 1’s for broadcast addresses? y
> Enter values
Field
Type:
Port:
Link:
Name:
Network uses 1’s
for broadcast
addresses?
Conditions/Comments
This indicates the data-module type for this connection.
Ethernet connections must be assigned to port 17 on the
C-LAN circuit pack.
The link number must be in the range 1 – 25 (for R8si), not
previously assigned on this switch.
Information-only; appears in list generated by the "list data
module" command.
Leave the default (y) if the private network contains only
DEFINITY switches and adjuncts. Set to n only if the
network includes non-DEFINITY switches that use the 0’s
method of forming broadcast addresses. See Appendix A,
“Data Module - type ethernet” for more information about
this field.
> Submit the screen
End
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000 CID: 77730
199