Definity ECS Admin for Network Connectivity.pdf - TextFiles.com

Networking Screens
A Screens Reference
Carrier
This field shows the letter of the carrier (A through E) circuit packs are being
administered on.
Valid entries
Display-only field.
Usage
Cabinet Layout
This field is only displayed for G3r. This field describes the physical layout of the
cabinet.
Valid entries
Display-only field.
Usage
Values that may display are five-carrier and
single-carrier-stack.
Carrier Type
This field shows the type of carrier.
Note: Note: For G3r, if the Carrier Type (as administered through the Cabinet
Administration screen) does not match the physical hardware, the Code
fields may display question marks.
Valid entries
Display-only field.
Usage
Values that may display are dup-switch-node,
expansion-control, not-used, port,
processor, and switch-node.
Slot
The slot equates to the physical slot of the given carrier; the number of slots displayed
depends on the system being configured.
• For G3r, the number of slots represent all administrable slots available for the
given carrier type.
• For G3si, all slots that could possibly be administered are displayed, even if they
do not apply to the current configuration of the system. This is to accommodate
the situation when a system is being reconfigured.
Valid entries
Display-only field.
Usage
278
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000