Definity ECS Admin for Network Connectivity.pdf - TextFiles.com

Networking Screens
A Screens Reference
Code
Enter the circuit pack code. If there is a physical circuit pack installed in the slot, the
entry must match that of the circuit pack. If there is equipment administered on a slot,
the equipment must be removed from the circuit pack before the circuit pack can be
changed or removed.
Valid entries
TN followed by a 3- or
4-digit number of a valid
DEFINITY circuit pack.
a valid ADXxxx number
a valid ASAIxx number
a valid DIGx number
LGATE
TN802
Usage
For the IP Interface assembly (TN802B/MAPD).
There must be at least two empty slots preceding the
slot administered as code TN802. The Code field for
these empty slots will automatically be populated
with DSMAPD, which must be changed to
MEDPRO for the MedPro mode of the IP
Interface/TN802B.
Sfx
Enter the circuit pack suffix, if applicable.
Valid entries
B to Z
blank
Usage
Mode
This is a display-only field that shows the circuit pack mode, if applicable.
Note:
Valid entries
Display-only field.
Usage
Name
This is a display-only field showing the alphanumeric name of the circuit pack (such
as Digital Line).
Note:
Note: When the circuit pack physically inserted in the slot differs from
what has been administered on this screen, a "#" displays between the Sfx
and Name fields.
Valid entries
Display-only field.
Usage
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000 CID: 77730
279