Definity ECS Admin for Network Connectivity.pdf - TextFiles.com

DCS over IP Trunk
Making Calls to the IP
trunk application from
NetMeeting
F IP Trunk Installation and
Administration
Before you place a call, make sure the following settings are correct.
• If You Have a LAN Connection:
• Make sure the TCP/IP settings are correct on the client machine. To verify this,
open an NT command window and ping the IP trunk.
• If You Have a Modem Connection:
Make sure you have the correct dial-up networking settings for the remote RAS
server that you are connecting to. You should be able to get these settings from
the network administrator of the remote PPP/RAS server. Once the dial-up
connection is made, you can ping the IP trunk.
To place a call:
1 On the Windows Taskbar, clicking Start>Programs>NetMeeting to start
NetMeeting. This path may vary depending on the configuration and operating
system of your computer.
The NetMeeting main window appears.
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000 CID: 77730
447