Definity ECS Admin for Network Connectivity.pdf - TextFiles.com

Configuration 3: R8si R8r Gateway
R8si
3 C-LAN Administration
Field
Subnet Mask
Gateway Addr
Net Rgn
Conditions/Comments
Enter the subnet mask associated with the IP address for
this IP interface. (The IP address is associated with the
node name on the Node Names screen).
In this example, leave the default subnet mask,
255.255.255.0, which indicates no subnetting for a Class
C IP address.
See the discussion of subnetting, Subnetting (page 16), in
Chapter 1 and Configuration 1: R8r R8si
(page 60) in this chapter for details about subnet masks.
Leave blank for this configuration. The only connection
to this IP interface is node-3 on Switch 3. Node-3 is on
the same subnetwork as this IP interface, so no gateway is
needed.
In general, for connectivity to other (sub)networks, enter
the address of a network node that will serve as the
default gateway to the other (sub)networks.
Enter the region number for this IP interface.
2 of 2
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000 CID: 77730
107