Definity ECS Admin for Network Connectivity.pdf - TextFiles.com

ISDN Feature Plus
B Private Networking
ISDN Feature Plus
This feature allows you to have basic feature transparency over public networks
without having a dedicated leased line. This provides a lower cost option for using the
switched public network.
How to administer ISDN Feature Plus
Note: Only Lucent representatives perform step 1.
1 On the System-Parameters Customer-Options form, set the:
~ G3 Version field to V8.
~ ISDN Feature Plus field to y.
2 On the same form, set either or both of the following:
~ ISDN-PRI field to y, or
~ ISDN-BRI Trunks field to y.
3 Set either or both of the following:
~ ISDN-BRI Trunk Group — Set the Supplementary Service Protocol
field to f
~ ISDN-PRI Trunk Group — Set the Supplementary Service Protocol
field to f.
4 On the Feature Related System Parameters form, set the Feature Plus Ext field
to the local extension used to terminate Feature Plus signaling for ISDN Feature
Plus.
5 On the Hunt Group form, to add a centralized AUDIX, set the Message Center
field to fp-mwi.
To start administration for Message Waiting Indication at the Message Center PBX:
1 On the Feature Related System Parameters form, set the MWI - Number of
Digits per AUDIX Subscriber field to the desired number.
2 On the Processor Channel Assignment, set the Application field to fp-mwi.
3 Administer the Message Waiting Indication Subscriber Number Prefixes form. To
start the Calling Name feature:
4 On the ISDN-BRI or ISDN-PRI trunk group form (whichever you are using), set
the Send Name field to y.
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000 CID: 77730
355