04.11.2014 Views

Definity ECS Admin for Network Connectivity.pdf - TextFiles.com

Definity ECS Admin for Network Connectivity.pdf - TextFiles.com

Definity ECS Admin for Network Connectivity.pdf - TextFiles.com

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Troubleshooting IP Solutions<br />

2 H.323 Trunks<br />

The solution to this problem is to set up a separate signaling group <strong>for</strong> each trunk<br />

group, as shown in Figure 3. More generally, set up a separate signaling group <strong>for</strong><br />

each set of trunk groups that have <strong>com</strong>mon attributes.<br />

Figure 2.<br />

Shared signaling group<br />

TGA1<br />

TGA2<br />

SGA1<br />

Private NW<br />

Public NW<br />

SGB1<br />

Trunk Group<br />

<strong>for</strong> Channel<br />

Selection =<br />

TGB1<br />

TGB1<br />

TGB2<br />

Switch A<br />

Switch B<br />

Figure 3.<br />

Separate signaling group<br />

TGA1<br />

SGA1<br />

Private NW<br />

SGB1<br />

Trunk Group<br />

<strong>for</strong> Channel<br />

Selection =<br />

TGB1<br />

TGB1<br />

TGA2<br />

SGA2<br />

Public NW<br />

SGB2<br />

Trunk Group<br />

<strong>for</strong> Channel<br />

Selection =<br />

TGB2<br />

TGB2<br />

Switch A<br />

Switch B<br />

No MedPro resources<br />

available<br />

C-LAN sharing<br />

If two switches are connected via an H.323 trunk and all MedPro resources are in use<br />

on the call-destination switch when a call is made, the call will fail even when a 2nd<br />

preference is administered in the routing pattern on the source switch. This can be<br />

avoided by setting the first preference look ahead routing (LAR) to “next” in the<br />

routing pattern.<br />

Depending on the network configuration, a single C-LAN board has the capacity to<br />

handle the signaling <strong>for</strong> multiple applications. For example, the call center Call<br />

Management System (CMS) would typically use a small portion of a C-LAN’s<br />

capacity so the same C-LAN could easily handle the signaling <strong>for</strong> other IP endpoints<br />

at the same time. There are many variables that affect the number of C-LAN and<br />

TN802B (MedPro) circuit packs that you will need <strong>for</strong> your network configuration.<br />

To accurately estimate the C-LAN and MedPro resources needed, a network<br />

configuration tool is available from Lucent. See Appendix D, Capacities and<br />

Per<strong>for</strong>mance <strong>for</strong> a summary of this tool.<br />

Traffic congestion is potentially a problem when multiple IP Interfaces (such as<br />

C-LAN, MedPro, PCs, CMS) share a network and some of the endpoints are heavily<br />

used. This problem can be minimized by using a switched network and assigning<br />

endpoints (such as CMS) to a separate LAN/WAN segment.<br />

<strong>Admin</strong>istration <strong>for</strong> <strong>Network</strong> <strong>Connectivity</strong><br />

555-233-504 — Issue 1 — April 2000 CID: 77730<br />

51

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!