Definity ECS Admin for Network Connectivity.pdf - TextFiles.com

Configuration 4: R8csi R8si Gateway
R8csi
3 C-LAN Administration
> Submit the screen
End
Field
BCC:
COS
COR:
TN:
Node Name:
Subnet Mask:
Establish
Connection?
Destination
Digits:
Destination Node
Name:
CHAP?
Conditions/Comments
Bearer Capability Class. This is a display-only field.
The values for these fields will be specified by the system
administrator.
The node name for the interface defined by this data module.
This must be a name entered on the Node Names screen.
n means that the switch at the remote end of this connection
(Switch 1 in this case) will be responsible for the call setup.
Enter y when administering the data module for Switch 1.
Not needed if the “Establish Connection?” field is set to n
Name of the node at the far end of this connection. This must
be a name entered on the Node Names screen.
This field enables/disables the Challenge Handshake
Authentication Protocol security mechanism on this link. If
you enter y, the system will prompt for a CHAP secret
(password).
2 of 2
142
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000