Definity ECS Admin for Network Connectivity.pdf - TextFiles.com

Networking Screens
A Screens Reference
Secondary D-channel
Enter a 6- to 7-character port number associated with the DS1 Interface circuit pack
port used for secondary D-channel signaling. Displays when the Associated Signaling
field is n (indicates NFAS). The port number assigns the secondary D-channel in the
Signaling Group. For 24-channel facilities, the 24th port is assigned as the D-channel.
For 32-channel facilities, the 16th port is assigned as the D-channel.
Valid entries
Usage
01 through 44 (G3r) First and second characters are the cabinet number
01 through 03 (G3si)
A through E
Third character is the carrier
01 through 20 Fourth and fifth characters are the slot number
16 or 24 Sixth and seventh characters are the port
blank
Max Number of NCA TSC
The maximum number of simultaneous Non-Call Associated Temporary Signaling
Connections (NCA-TSCs) that can exist in the Signaling Group. This number
includes all NCA-TSCs that are administered on this screen and those NCA-TSCs
that tandem through the switch in-route to another switch in the network.
Valid entries
0 to 256.
Usage
Max number of CA TSC
The maximum number of simultaneous Call Associated Temporary Signaling
Connections (CA-TSCs) that can exist in the Signaling Group. Typically, the number
of ISDN-PRI trunk group members controlled by the Signaling Group.
Valid entries
0 to 400.
Usage
Trunk Group For NCA TSC
The ISDN-PRI trunk group number whose incoming call handling table will be used
to handle incoming NCA-TSCs through the Signaling Group. Enter the assigned
ISDN-PRI trunk group number whose call handling table will be used to route the
incoming NCA TSCs. (An ISDN-BRI trunk group may not be used.)
Valid entries
1 to 99.
blank
Usage
282
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000