Definity ECS Admin for Network Connectivity.pdf - TextFiles.com

Configuration 1: R8r R8si
3 C-LAN Administration
>Press the ENTER/SAVE key to save and exit
End
Field
COS
COR:
TN:
BCC:
Node Name:
Subnet Mask:
Establish
Connection?
Destination
Digits:
Destination
Node Name:
CHAP?
Conditions/Comments
The values for these fields will be specified by the system
administrator.
This is a display-only field.
The node name for the interface (C-LAN port) defined by this
data module. This must be a name entered on the Node Names
screen.
n means that the switch at the remote end of this connection
(Switch 1 in this case) will be responsible for the call setup.
Enter y when administering the data module for Switch 1.
Not needed if the “Establish Connection?” field is set to n
Name of the node at the far end (Switch 1) of this connection.
Must be a name entered on the Node Names screen.
This field enables/disables the Challenge Handshake
Authentication Protocol security mechanism on this link. If you
enter y, the system will prompt for a CHAP secret (password).
2 of 2
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000 CID: 77730
69