EvitaXL

Configuration
Specific system settings
Screen configurations
The following areas of the screen configuration
are stored:
— Curves, loops, trends or short trends
displayed on the main screen
— 3 sets of measured values
— Function keys
— Customised data table
Changes in the configuration of the
trends have an effect on the trends
stored in the screen configuration.
6 different screen configurations are
available.
Works setting for the screen configuration,
see page 229.
Display screen configuration
On the main screen:
● Touch the screen key » 1 « until the
required screen configuration is displayed.
Fast changeover to the required screen
configuration:
● Touch the screen key » 1 « several
times until the required screen configuration
is displayed.
Set screen configuration
● Press the key » System Setup«.
● Touch the screen key »Screen«.
● Touch the screen key »View...«.
Save the current screen configuration
● Touch the screen key » «.
● Confirm = press rotary knob.
Or on the main screen:
● Keep the screen key » 1
«
●
depressed for 3 seconds, the key
turns yellow.
Select and confirm a memory location
with the rotary knob.
132 Instructions for Use EvitaXL
230