EvitaXL

Setting the Master and Slave devices
To perform independent lung ventilation:
● Set up one device for ILV/Master
mode and
● the other device for ILV/Slave mode.
● Set the parameters, see page 58.
● Do not activate ILV mode until all
the parameters for the ILV/Master
and ILV/Slave are fully set.
Setting ILV/Master
Volume-controlled ventilation with fixed,
mandatory minute volume MV, set with
tidal volume VT and frequency f.
For independent lung ventilation of
patients with no spontaneous breathing.
Set the ILV ventilation pattern with the
parameters:
Tidal volume »VT«
Insp. Flow »Flow«
Frequency »f«
Inspiration time »Tinsp«
O2 concentration »O2«
Positive end-expiratory pressure »PEEP«
--------------------------------------------------------------------------------
To set:
● Touch the appropriate screen knob.
● Adjust to the desired value
= turn rotary knob.
● Confirm setting = press rotary knob.
--------------------------------------------------------------------------------
ILV/Master can be supplemented to
include the following special functions:
— Flowtrigger, page 68.
— ATC, page 72.
— Sigh, page 74.
— PLV, page 75.
These functions can be enabled in »Add.
settings«.
PAW
Flow
Insp.
pause
Tinsp Te
Setting Ventilation Modes
ILV
Instructions for Use EvitaXL 55
PPlat
1
f
Insp. flow
Pmax
(configurable)
t
PEEP
t
005
183