EvitaXL

Preparing for use
Entering the humidifier type
Application mode Tube/Mask (optional)
Entering the humidifier type
In standby mode:
● Touch the screen key »Humidifier«.
The menu for entering the humidifier
used is now displayed:
Active Humid. =
Breathing gas humidifier
HME/Filter =
Heat moisture exchanger
● Touch the screen key corresponding
to the type of humidifier used. The
key turns yellow.
● Confirm = press the rotary knob, the
key turns green.
The selected humidifier is included
in the compliance calculation by
EvitaXL.
The yellow LED in front of the symbol
for the selected humidifier lights up
in the status field.
Active humidifier
HME/Filter
After changing the humidifier:
● Perform a leak test, page 39.
Application mode Tube/Mask
(optional)
In standby mode:
● Touch the screen key »Tube/Mask«.
The menu for selecting tube or mask
is displayed (NIV – non-invasive ventilation).
● Touch the corresponding screen key;
it turns yellow.
● Confirm = press the rotary knob, the
key turns green.
The corresponding application mode
is now active.
If » Mask (NIV)« has been
selected:
= Mask Ventilation is displayed.
For details on using NIV, see page 76.
40 Instructions for Use EvitaXL
197
198