EvitaXL

Technical Data
Equipment outputs
Equipment outputs
Digital outputs
COM 1
as well as
COM 2 and COM 3 (optional)
configurable for: LUST protocol
Baud rate: 1200, 2400, 4800, 9600, 19200 Baud
Data bits: 7
Parity: even
Stop bits: 1
Pin assignment of the MEDIBUS cable
Pin assignment of the printer cable
MEDIBUS protocol
Baud rate: 1200, 2400, 4800, 9600, 19200 Baud
Data bits: 8
Parity: even, odd, no
Stop bits: 1 or 2
(19200 baud are required for transmitting high-speed data, e.g. for the
flow curve)
Printer protocol HP Deskjet series 500
Baud rate: 1200, 2400, 4800, 9600, 19200 Baud
Data bits: 8
Parity: no
Stop bits: 1
EvitaXL
Cable length up to 15 m
Load impedance 3000 to 7000 Ω
5
3
2
9-pin sub-D
connector
EvitaXL
5
3
2
9-pin sub-D
connector
GND GND
TxD RxD
RxD TxD
Connector housing
GND GND
TxD RxD
RxD TxD
Connector housing
Signal level (for load impedance from
3000 to 7000 Ω)
Low between 3 and 15 V
High between –3 and –15 V
Electrical isolation Ports COM 1, COM 2 and COM 3 (optional)
are electrically isolated from the equipment electronics.
The test voltage for electrical isolation is 1500 V.
Ports COM 2 and COM 3 are not electrically isolated from one another.
Digital output for Independent Lung Ventilation (ILV)
198 Instructions for Use EvitaXL
5
2
3
9-pin sub-D
socket
7
3
2
25-pin sub-D
socket