EvitaXL

Gas supply
● Screw the connecting hoses for medical air (air) and
oxygen (O2) from the piped supply into the back panel of
EvitaXL and plug their connectors into the terminal units.
The compressed gases must be dry and free from dust
and oil. Gas pressure must be 3 to 6 bar.
Connecting Evita Remote (optional)
● The plug-in card for Evita Remote may only be installed and
programmed by specialists.
For remote control of EvitaXL via the Remote Pad for parallel,
remote operation of the following LED and key functions:
1 red LED – to indicate warning messages
2 yellow LED – to indicate caution and advisory messages
3 »g Alarm Silence« key – to suppress the alarm tone for
approx. 2 minutes
4 »Alarm Reset« key – to acknowledge alarm messages
5 » Neb.« key – to start and end medicament
nebulisation
6 »O2 Y suction« key – for oxygenation for bronchial
suctioning
7 »Insp. hold« key – for sustained, manually induced inspiration
8 »Exp. hold« key – for extended and sustained expiration
The function of the respective LEDs and keys is the same as
on EvitaXL and is described in the application chapters of
these Instructions for Use.
Preparing for use
Gas supply
Connecting Evita Remote (optional)
Air O2
Instructions for Use EvitaXL 31
1
2
3
4
5
6
7
8
085
074