EvitaXL

Select printer protocol
● See "Set interface" on page 136.
In addition to automatically triggered printouts at predetermined
intervals, printing can also be started manually via the
on-screen function key »Print«, see "Configuration", "Define
function keys", page 130.
Analogue interface
The analogue interface on EvitaXL has two channels to which
measured value signals can be assigned as desired.
Characteristics and PIN assignment
See "Technical data", page 198.
External voltages must not be applied here!
Assign channels:
● See "Set interface" on page 136.
Measured
value
signal
Designation Range/voltage
level
PAW Airway pressure –10 to 100 mbar
0 to 4.095 V
Flow Expiratory and inspiratory
flow
V Expiratory and inspiratory
volume
–196 to 196 L/min
0 to 4.095 V
0 to 2 L
0 to 4.095 V
MV Minute volume 0 to 41 L/min
0 to 4.095 V
f Ventilation frequency 0 to 150 bpm
0 to 4.095 V
FiO2 Inspiratory O2 concentration 0 to 100 Vol.%
0 to 4.095 V
R Resistance 0 to 100 mbar/L/s
0 to 4.095 V
C Compliance 0 to 250 mL/mbar
0 to 4.095 V
CO2 Expiratory O2 concentration 0 to 15 kPa
0 to 4.095 V
etCO2 End-expiratory CO2
concentration
0 to 15 kPa
0 to 4.095 V
NO Inspiratory flow for NOdomo 0 to 125 L/min
0 to 4.095 V
Evita 4 Link (optional)
Preparation
Instructions for Use EvitaXL 181