EvitaXL

New features in EvitaXL SW 6.n
Individual screen configuration storage
For storing the configuration of the curves, measured values
and function keys displayed on the main screen in up to six
different memory locations.
Automatic P 0.1 procedure
For performing the procedure automatically in the set interval.
Configurable Flowtrigger
Start setting for the Flowtrigger is configurable for the start
according to patient mode or weight.
Extended setting range for Pinsp, ASB and PEEP
— Pinsp adjustable from 0 to 95 mbar (previously 0 to
80 mbar)
— ASB adjustable from 0 to 95 mbar (previously 0 to 80 mbar)
— PEEP adjustable from 0 to 50 mbar (previously 0 to
35 mbar)
Additional settings for APRV
— Tlow in 0.05 second increments
Conclusive display of PASB
— ∆PASB for settings relative to PEEP
— PASB for absolute settings
Simplified setting for standby
— Press the key »O Start/Standby« and keep it depressed
for 3 seconds.
As for Evita 4 and Evita 2 dura.
ATC for the mandatory phase can be switched off
ATC is only effective during the spontaneous breathing phase
or during the entire breathing cycle.
O2 Therapy (optional)
Continuous flow application with adjustable O2 concentration
and flow for the oxygen therapy.
New features in EvitaXL SW 6.n
Lung Protection Package (optional)
Comprises the functions:
— QuickSet
Direct adjustment,
— PressureLink
PEEP/Pinsp connection,
— Recruitment trends and
— Low Flow PV-Loop
Aid for performing Recruitment procedures and for optimising
ventilation settings.
Additions to SmartCare/PS
(optional, separate Instructions for Use)
— Extended area of application
— ATC can be activated
— Web-based application service (WAS)
Instructions for Use EvitaXL 245