EvitaXL

Replace cooling air filter
— Clean if soiled or after 4 weeks at the latest.
Replace after 1 year at the latest.
1 Remove cooling air filter from its slot on the back of EvitaXL.
● Fit a new cooling air filter or clean the installed filter in warm
soapy water and dry thoroughly.
● Insert the cooling air filter in the mount without creasing.
● The old cooling air filter can be disposed with domestic
waste.
DC power supply MB:
● On the back of EvitaXL, undo the two knurled screws securing
the grating over the power supply fan and remove the
grating.
● Remove cooling air filter from its slot.
● Fit a new cooling air filter or clean the installed filter in warm
soapy water and dry thoroughly.
● Insert the cooling air filter in the mount without creasing.
● Refit the grating over the cooling air filter and tighten the
knurled screws by hand.
● The old cooling air filter can be disposed with domestic
waste.
Removing and reinserting ambient air filter
— Clean after 4 weeks.
Replace after 1 year at the latest.
2 If necessary, swivel port to the left.
3 Use coin to loosen screw, and remove protective cover.
4 Remove the ambient air filter from the protective cover.
● Slide the cleaned or new ambient air filter under the tabs.
● Replace protective cover, and tighten screw with a coin.
● Dispose of used ambient air filter with domestic waste.
Replace cooling air filter
Removing and reinserting ambient air filter
Instructions for Use EvitaXL 167
2
4
3
1
089
217
061
062