EvitaXL

As for ventilation hoses, water traps and associated jars,
Y-piece, expiration valve (or, in the event of severe soiling,
their individual parts), individual parts of the medicament
nebuliser and adapter parts
● Disinfect with moist heat (93 oC/10 minutes) in cleaning
and disinfecting machine. Only use cleaning agent.
If a cleaning and disinfection machine is not available:
● Immerse the parts in a disinfectant bath, e.g. with Sekusept
made by Messrs. Henkel.
Comply with the manufacturer's instructions.
● Then rinse with clean water, preferably from a soft water
supply.
● Shake water out thoroughly, and leave the products to dry.
Expiration valve and its individual parts after disinfection
● Rinse thoroughly with clear water, preferably from a soft
water supply. Shake water out thoroughly.
● After rinsing thoroughly, dry expiration valve.
● After drying, sterilise in hot steam at 134 o C, otherwise liquid
may remain in the pressure measuring line and impair
correct functioning.
Ventilation hoses, water traps and associated water jars,
Y-piece, temperature sensor
● These parts can be sterilised in hot steam at 134 o C.
Bacterial filter
● Must be conditioned in accordance with the separate
Instructions for Use.
Humidifier
● Must be conditioned in accordance with the separate
Instructions for Use.
Preparing
Disinfecting and Cleaning
Instructions for Use EvitaXL 161
057