EvitaXL

Additional functions
Medicament nebulisation
● Prepare the medicament nebuliser in accordance with its
Instructions for Use.
For use during adult ventilation
1 Connect the nebuliser to the inspiratory side (temperature
sensor side) of the Y-piece.
2 Connect the inspiration hose to the medicament nebuliser.
● Place the medicament nebuliser in the vertical position.
● Using clamps, route the nebuliser hose back to the ventilator
along the expiratory hose.
For use during paediatric ventilation
3 Insert the catheter connector (ISO cone Ø15/Ø11) in the
inlet of the medicament nebuliser.
4 Insert the adapter (ISO cone Ø 22/Ø11) in the outlet.
5 Fit the corrugated hose (0.13 m long) to the outlet adapter.
6 Remove the corrugated hose of the hose set from the
inspiratory adapter of the Y-piece and connect it to the inlet
adapter of the medicament nebuliser.
● Connect the free end of the corrugated hose at the outlet
of the medicament nebuliser to the inspiratory adapter of
the Y-piece.
7 Connect the nebuliser hose to the port on the front panel of
the EvitaXL.
● Fill the medicament nebuliser in accordance with the specific
Instructions for Use.
The effect of aerosols on sensors, filters and heat and
moisture exchangers (HME) must be taken into account!
Do not place a microbial filter on the nebuliser outlet during
nebulisation!
The measuring function of the flow sensor may be impaired.
The flow resistance of filters is liable to increase and may
impair ventilation.
During medicament nebulisation, do not use a heat and
moisture exchanger (HME) at the Y-piece. Risk of
increased breathing resistance!
92 Instructions for Use EvitaXL
5
D
6
4
1
2
1
1
1
1
1
7
2
2
2
2
2
2
3
EvitaXL
037
038
039