14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Output shaft for 1st-4th gears, adjusting<br />

Página 3 de 8<br />

35-48<br />

It is necessary to readjust the output shaft when<br />

the following components are replaced:<br />

Transmission housing<br />

Clutch housing<br />

Output shaft for 1st-4th gear<br />

or<br />

Tapered roller bearing<br />

Adjustment overview Page 39-23<br />

Requirements<br />

Sealing surfaces of clutch and transmission<br />

housings must be free of sealant.<br />

When taking measurements, install only the<br />

shaft to be measured.<br />

- Press tapered roller bearing outer race with a<br />

1.70 mm thick shim into transmission housing,<br />

supporting transmission housing directly under<br />

bearing support with thrust piece 2050.<br />

- Set complete 1st-4th gear output shaft in clutch<br />

housing.<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

12/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!