14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Trailing arm and transverse links (all-wheel drive vehicles), assembly overview<br />

Página 28 de 44<br />

• Thrust piece T10030/1A<br />

• Tightening strap T10038<br />

• Wheel hub support T10149<br />

• Hydraulic press VAS 6178<br />

• Hollow piston cylinder VAS 6179<br />

Special tools, testers and auxiliary items required<br />

• Insert tool T10205/13<br />

• Assembly tool T10254<br />

Caution!<br />

• Starting from model year 2004 a bonded rubber<br />

bushing is inserted in place of the ball joint.<br />

• If the ball joint must be replaced, then a new<br />

bonded rubber bushing and a new lower<br />

transverse link Item - 19 - must be inserted.<br />

• At the same time the ball joint Item - 7 - and<br />

upper transverse link Item - 6 - must be<br />

replaced.<br />

• The replacement of the ball joints by the bonded<br />

rubber bushing must be done on both side of the<br />

vehicle!<br />

• A mixed installation is not allowed.<br />

If a bonded rubber bushing is already inserted, then the<br />

points before specified do not apply. The bonded<br />

rubber bushing must only be exchanged.<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

12/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!