14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Wheel alignment<br />

Página 13 de 14<br />

balance if necessary<br />

position .<br />

44-5, Vehicle trim height Zero<br />

- Loosen lock nut - 1 - .<br />

- Adjust toe by turning tie rod to left and/or right.<br />

To do this position wrench at nut - arrow - on tie rod.<br />

Note:<br />

• After turning tie rods, make sure that the boots are not<br />

twisted.<br />

Twisted boots wear out quickly.<br />

- Tighten lock nut - 1 - 50 Nm and check toe again to<br />

ensure adjustment has not changed.<br />

After tightening lock nut - 1 - it is possible that the value will<br />

change slightly.<br />

If toe adjustment has not moved more than 2’ from<br />

specification, adjustment is ok.<br />

Left and right-hand wheel lock, checking<br />

This test is only necessary if:<br />

• The steering locks differ by more than 2 from one<br />

another from the steering center point<br />

• One side has contact between tire and a front axle<br />

component or body at full lock<br />

• Turning circles left/right different<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

12/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!