14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Rear axle, servicing<br />

Página 20 de 32<br />

Note:<br />

• After removing the hydraulic bonded rubber bushings,<br />

only "conventional" bonded rubber bushings must be<br />

installed.<br />

• The hydraulic bonded rubber bushings must be<br />

replaced on both sides of rear axle. A mixed<br />

installation is not allowed.<br />

Removing<br />

- Measure dimension - a - from the center of the wheel to<br />

the lower edge of the wheel housing.<br />

- Make a note of the measurement. This is necessary to<br />

tighten the bolts for the rear axle to the bearing bracket.<br />

- Install brake pedal loading device V.A.G1869/2 .<br />

- Lift vehicle on lifting platform.<br />

- Remove wheels.<br />

- Separate brake lines - arrowA - and remove clip.<br />

- Remove left brake hose from bracket - 2 - .<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

12/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!