14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Hydraulic unit, brake booster/brake master cylinder Mark 60, assembly overview<br />

Página 18 de 19<br />

45-61<br />

Installing<br />

Note:<br />

Only remove sealing plugs on new hydraulic<br />

unit when the corresponding brake line is going<br />

to be installed.<br />

If the sealing plugs are removed too early,<br />

brake fluid can escape, it can no longer be<br />

guaranteed that the module is sufficiently filled<br />

or adequately bled.<br />

When assembling the control module and<br />

hydraulic unit, be sure that the hydraulic unit<br />

valve dome does not come in contact with the<br />

control module solenoid valves.<br />

- Using new bolts, install control module to<br />

hydraulic unit. Do not tighten more than a max. 4<br />

Nm (35 in. lb).<br />

- Bolt ABS module to bracket.<br />

Do not tighten bolts completely. Attaching the<br />

individual brake lines is made easier.<br />

- After tightening brake lines, tighten hydraulic<br />

unit.<br />

- Further installation is carried out in the reverse<br />

sequence.<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

12/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!