Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Driver's side seat adjustment, On Board Diagnostic (OBD)
Página 4 de 53
01-388
Seat and mirror settings for
normal driving, storing
- Switch on ignition.
- Set the seat.
- Set both exterior mirrors.
- Now press one of the memory
buttons (-1- to -3-) and hold it
depressed for about 3 seconds
until an acoustic signal confirms
that the settings are stored in the
memory.
The settings are now stored on the
selected memory button.
The stored settings can be recalled
via the memory buttons (-1- to -3-)
as well as via the radio wave remote
control.
Allocating a seat adjustment to a
radio wave remote control button is
described at the end.
Note:
When the vehicle battery is
disconnected all the data stored
for the seat and mirror settings
are lost.
For future versions of the control
module this data will be retained
even when the battery is
disconnected.
Each time settings are stored on
a button the previous data will be
erased.
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
13/2/2005