14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Electronic Power Control (EPC)<br />

Página 7 de 13<br />

20-68<br />

Note:<br />

Only gold plated contacts may be<br />

used to service the contacts in the<br />

TP sensor / Sender for accelerator<br />

pedal position connection.<br />

Function<br />

Both the Throttle Position (TP)<br />

sensor -G79- and the Sender -2- for<br />

accelerator pedal position -G185-<br />

are located on the accelerator pedal<br />

and pass the driver's requirements<br />

on to the engine control module<br />

independently of one another. Both<br />

are installed together in a housing.<br />

Test conditions<br />

Fuses must be OK.<br />

Battery voltage must be at least<br />

11.5 V.<br />

All electrical consumers, e.g.<br />

lights and rear window defroster<br />

must be switched off.<br />

If the vehicle is equipped with air<br />

conditioning, this must be<br />

switched off.<br />

Selector lever must be in<br />

position "P" or "N" on models<br />

with an automatic transmission.<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

12/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!