Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Radio, Premium V and Premium V - Monsoon
Página 9 de 10
91-23
Anti-theft security code, inputting
The security code is "fixed", meaning the radio is
programmed by the radio manufacturer to accept
only one code. This code must be input during
the new vehicle delivery inspection, into newly
installed or existing units that have been
removed and reinstalled.
Prerequisites:
Obtain security code, either from code card or
from customer.
Radio power supply fuse OK (according to
wiring diagram)
Inputting code / cancelling electronic lock-up
- Switch on radio
"SAFE" appears in radio display, followed by
"1000" approximately 3 seconds later.
- Input the security code found on the radio card
using the station preset buttons on the radio.
Button "1" corresponds to the first number in the
security code, "2" the second and so on. Press
the applicable button repeatedly until the desired
number appears in the display (E.g.: press
button "1" three times if the first number in the
code is 3).
- When the entire code has been input and
appears on the display, press the right side of
the "Seek" button (" ") for longer than 2
seconds until an audible signal is heard.
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
13/2/2005