14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Output Diagnosis Test Mode (DTM)<br />

Página 15 de 45<br />

01-114<br />

- Check DTC memory, repair Diagnostic Trouble<br />

Codes (DTCs) if necessary and then erase DTC<br />

memory Page 01-23 , DTC memory, checking<br />

and erasing.<br />

- Erase learned values and adapt Motronic<br />

Engine Control Module (ECM) -J220- again<br />

Page 24-182 .<br />

- Read readiness code Page 01-146 . If the<br />

DTC memory has been erased or the Motronic<br />

Engine Control Module (ECM) -J220- was<br />

disconnected from battery (B+) positive, the<br />

readiness code must be generated again<br />

Page 01-149 .<br />

3. Activating Secondary Air Injection (AIR)<br />

Pump Relay -J299-:<br />

- Press -button.<br />

Output Diagnosis Test Mode (DTM)<br />

Secondary Air Injection (AIR) Pump Relay -J299-<br />

Indicated on display:<br />

The Secondary Air Injection (AIR) Pump Relay<br />

J299- activates the Secondary Air Injection (AIR)<br />

Pump Motor -V101-, and this must run at<br />

intervals until the next control element is<br />

activated by pressing the button.<br />

If the Secondary Air Injection (AIR) Pump Motor<br />

V101- does not run at intervals:<br />

- Remove center insulation tray:<br />

<strong>Repair</strong> Manual, Body Exterior; <strong>Repair</strong> Group 50<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=...<br />

12/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!