Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Output Diagnosis Test Mode (DTM)
Página 39 de 45
01-138
Output Diagnosis Test Mode was aborted Indicated on display:
- Switch off ignition.
- Replace engine control housing:
Repair Manual, 2.8 Liter VR6 4V
Engine Mechanical, Engine Code(s):
BDF; Repair Group 15, Valve train,
servicing
Note:
The control housing is only replaced
complete with Valve -1- for camshaft
adjustment -N205- and Camshaft
Adjustment Valve 1 (exhaust) -N318-
.
- Check DTC memory, repair
Diagnostic Trouble Codes (DTCs)
if necessary and then erase DTC
memory Page 01-23 , DTC
memory, checking and erasing.
- Read readiness code Page 01-
146 . If the DTC memory has
been erased or the Motronic
Engine Control Module (ECM) -
J220- was disconnected from
battery (B+) positive, the
readiness code must be
generated again Page 01-149 .
LED does not flash:
- Press -C- button to abort output
Diagnosis Test Mode (DTM).
Output Diagnosis Test Mode was aborted Indicated on display:
- Switch off ignition.
- Remove wiper arms and cowl
panel:
Repair Manual, Electrical
Equipment, Repair Group 92
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=...
12/2/2005