14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Convenience system (vehicles with power windows), On Board Diagnostic (O...<br />

Página 158 de 214<br />

01-247<br />

Output Diagnostic Test Mode<br />

(DTM), vehicles from 06.01 on<br />

The components displayed in the Output<br />

Diagnostic Test Mode (DTM) can differ<br />

depending upon the equipment fitted to the<br />

vehicle. For example on vehicles without<br />

ATA there will be no step "1" as listed in the<br />

table below.<br />

The Output Diagnostic Test Mode (DTM)<br />

activates the following components in the<br />

stated sequence:<br />

Step Display in tester Reaction<br />

1 Interior light, reading lights<br />

- Interior and reading lights are<br />

activated<br />

2 "Safe" LED driver's door<br />

3 Instrument illumination<br />

4 Signal close sliding roof<br />

5 Turn signal lights activation (for antitheft<br />

alarm)<br />

6 Alarm horn (for anti-theft alarm)<br />

7 END<br />

- "Safe" LED lights up<br />

- Switch illumination in control<br />

module active<br />

- Sliding roof closes 1)<br />

- Activated continuously (lights up<br />

cont.)<br />

- Horn sounds continuously<br />

- Information: End of regular final<br />

control test<br />

1) When performing Output Diagnostic Test Mode (DTM) "Signal close sliding roof", the<br />

ignition and S-terminal must be inactive (no key in ignition/starter switch) and one of the<br />

front doors must be open.<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

13/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!