14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Rear axle, servicing<br />

Página 17 de 32<br />

- Remove plugs from trailing arm - 3 - and tighten<br />

tensioning strap .<br />

1 - Support arm of lifting platform<br />

2 - Tightening strap T10038<br />

- The vehicle must be tightened with tensioning straps on<br />

left and right side.<br />

- Grease bonded rubber bushing kidney shaped cavity with<br />

assembly paste G052150A2 before installing rear axle.<br />

If the rear axle is not "lubricated" when installed, it will<br />

be noisy when driving.<br />

Tightening bearing bracket is only possible, when the<br />

measured value - a - from the middle of wheel hub to<br />

lower edge bordering wheel housing is reached.<br />

Otherwise the bonded rubber bushing will be distorted,<br />

resulting in reduced service life.<br />

- Turn wheel hub until one of the holes for wheel bolts is at<br />

the 12 o'clock position.<br />

- Install wheel hub support T10149 with a wheel bolt.<br />

- Lift wheel bearing housing using engine/transmission jack<br />

until dimension - a - is reached.<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

12/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!