14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

DTC memory<br />

Página 2 de 7<br />

01-24<br />

Work sequence<br />

Note:<br />

The main fuses must be OK.<br />

The battery voltage must be at<br />

least 11.5 V.<br />

Ground (GND) connection<br />

between engine and body must<br />

be OK.<br />

All electrical devices, e.g. lights<br />

and rear window heating must<br />

be turned off.<br />

If the vehicle is equipped with air<br />

conditioning, it must be turned<br />

off.<br />

Selector lever must be in<br />

position "P" or "N" on vehicles<br />

with an automatic transmission.<br />

- Connect VAG 1551 scan tool (or<br />

VAG 1552) and select Engine<br />

Control Module (ECM) with the<br />

"Address word" 01. When doing<br />

this the engine must be running at<br />

idle: (Connecting scan tool and<br />

selecting Engine Control Module<br />

(ECM) Page 01-12 ).<br />

Only when engine does not start:<br />

- Operate starter for approx. 6<br />

seconds. Then do not switch the<br />

ignition off.<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

12/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!