Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Front suspension R32, servicing
Página 25 de 43
5. Hex bolt
◦ Always replace
◦ The point on the hex bolt must
point in normal direction of
travel
6. Self-locking hex nut, 45 Nm
◦ Always replace
7. Self-locking nut
◦ 60 Nm plus an additional 1 / 4
turn 90
◦ Never less than 90 !
◦ Turning angle tolerance 90
to 120
◦ Always replace
8. Self-locking hex nut, 45 Nm
◦ Always replace
9. Wheel bearing housing
◦ After pressing out the tie rod
end, press socket back into tie
rod arm
10. Ball joint
◦ Checking 40-4, Ball joint,
checking
◦ Removing and installing 40-
4, Ball joint, removing and
installing
11. Tie rod end
12. Shield plate
13. Hex bolt, 10 Nm
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
12/2/2005