14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Rear axle, servicing<br />

Página 25 de 32<br />

- Press in bonded rubber bushing until a gap of 0.2 mm -<br />

arrow - is available.<br />

- Measure this gap - arrow - with a measure gauge - A - .<br />

- Check position of bonded rubber bushing after installing.<br />

Tighten vehicle to lifting platform<br />

Caution!<br />

If the vehicle is not secured, there is a risk that it may<br />

slip off the hoist.<br />

- Remove plugs from trailing arm - 3 - and tighten<br />

tensioning strap .<br />

1 - Support arm of lifting platform<br />

2 - Tightening strap T10038<br />

- The vehicle must be tightened with the tensioning straps<br />

on left and right side.<br />

- Grease bonded rubber bushing kidney shaped cavity with<br />

assembly paste G052150A2 before installing rear axle.<br />

Note:<br />

• If the rear axle is not "lubricated" when installed, it will<br />

be noisy when driving.<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

12/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!