Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Readiness code
Página 9 de 37
01-153
Note:
If the ignition is switched off between
"Check DTC memory" and "Erase
DTC memory" the DTC memory will
not be erased.
Rapid data transfer
Select function XX
HELP
- Press button.
Work step 3: Adjust the Throttle
Valve Control Module -J338- to the
Motronic Engine Control Module
(ECM) -J220-
Indicated on display:
- Press buttons -0- and -4- for
function "Initiate basic setting"
and confirm entry with -Q- button.
Basic setting
Input display group number XXX
Indicated on display:
- Press buttons -0-, -6- and -0- for
"Display group number 60" and
confirm entry with -Q- button.
System in basic setting 60
xxx.x % xxx.x % x ADP. runs
Indicated on display: (1 to 4
display zones)
- Check specifications in display
zones 3 and 4:
Display zone 3: 0 to 8
Display zone 4: ADP. runs, ADP.
OK.
System in basic setting 60
xxx % xxx % 8 ADP. OK.
Indicated on display: (1 to 4
display zones)
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=...
12/2/2005