14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Flush-bonded windows<br />

Página 35 de 36<br />

- When installing mirror - 1 - , attach at 6090 offset to<br />

installation position and turn - arrow - until retaining spring<br />

engages.<br />

Insert rubber seal for axle of rear windshield wiper motor<br />

into rear window.<br />

For <strong>Jetta</strong>, check gap dimension between rear lid and rear<br />

window using Adjusting gauge 3371 ; rear window gap<br />

dimension 64-1, Rear window (<strong>Jetta</strong>), assembly<br />

overview .<br />

Rear window gap dimension<br />

assembly overview .<br />

64-1, Rear window (<strong>Golf</strong>),<br />

Activator must not be applied onto distributing wire for<br />

window heater.<br />

Secure rear window using adhesive tape during curing<br />

time.<br />

For <strong>Jetta</strong>, secure rear window using window adjusters (443<br />

845 631 A) during curing time.<br />

If adhesive bead has been applied too thick and adhesive<br />

expands onto area of window heating, then excess<br />

adhesive must be removed.<br />

Minimum curing time<br />

Warning!<br />

Special requirements must be fulfilled for replacing<br />

bonded windows. This includes that e.g. a newly<br />

bonded windshield is safe for vehicle operation also in<br />

case of an accident after a specified minimum curing<br />

time.<br />

Using new 2K adhesive DA 004 600 A2 , a shorter<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

13/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!