14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Valve gear, servicing<br />

Página 35 de 49<br />

15-80<br />

- Position camshafts in cylinder head to TDC No.<br />

1 cylinder.<br />

Camshaft bar T10068 must engage in both shaft<br />

grooves.<br />

Note:<br />

If the camshaft bar cannot be engaged in the<br />

camshafts, turn camshafts in direction of rotation<br />

past TDC No. 1 Cyl. and then back to TDC No. 1<br />

Cyl.<br />

- Before installing, check screen in control<br />

housing for soiling Page 15-64 , Fig. 7<br />

- Before installing control housing, lightly lubricate<br />

contact surfaces in control housing for camshaft<br />

seals.<br />

- Lubricate contact surfaces of camshaft seals<br />

lightly and slowly push control housing over<br />

camshaft seals.<br />

- Install control housing (arrows) and tighten to 8<br />

Nm.<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

12/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!